CBG Isolate | 20g (Organic)

Specifications

Cannabinoid Disclosure

All products are derived from federally compliant hemp and contain no more than 0.3% Delta-9 THC by dry weight. Cannabinoid levels may vary slightly from batch to batch. Independent third-party laboratory testing is conducted for each batch, and results are available via the Certificate of Analysis (COA). Even when laboratory testing indicates non-detectable levels of Delta-9 THC, trace cannabinoids may still be present. We cannot guarantee that use of this product will not result in a positive drug test.

Most cannabinoid isolates are produced through a long, solvent-heavy process. Typically, solvents such as ethanol or hydrocarbon gases are used to extract a crude oil from hemp flower. That crude oil is then filtered, refined, and distilled into a distillate. From there, additional chemical solvents are introduced during a crystallization step — often using supersaturation — to force cannabinoids to separate and crystallize.

The result may be an isolate, but the path to get there involves multiple solvents, repeated processing steps, and significant chemical handling.

Solventless, water-based extraction

We produce our isolates using a patented, water-based extraction method. Instead of starting with crude oil and distillate, we work directly with hemp biomass — separating cannabinoids using water instead of chemical solvents, hydrocarbons, or crystallization agents.

The cannabinoid-rich solution is then passed through progressively finer micron filtration to remove plant material and impurities. The water is gently removed under vacuum, leaving behind a pure cannabinoid material with a soft, off-white color similar to unbleached flour.

Wiped-film distillation for clarity

To finish, we polish the material using a wiped-film distillation system — a precision low-vacuum process that gently removes the small amount of remaining color. The result is a pure white isolate, achieved without bleaches, solvents, or chemical whiteners.

What's remarkable: this polishing step changes the appearance dramatically, but the cannabinoid potency stays virtually unchanged. The purity is already there before we ever touch the color.

Crystallizes naturally — no chemical assistance

Fresh from distillation, the material flows like warm honey. Left undisturbed, it crystallizes on its own within 12 to 48 hours into solid, high-purity isolate — no crystallization solvents required, no chemical triggers needed.

This is one of the clearest signs of a truly pure isolate: when cannabinoids are clean enough, they want to crystallize on their own. Most conventional isolates can't do this without chemical assistance.

Once crystallized, we break the material from its trays, mill it to a uniform consistency, and pass it through mechanical sifting screens to ensure a fine, free-flowing powder ready for use.

What we don't use

• No ethanol or alcohol-based solvents
• No hydrocarbon gases (butane, propane)
• No crystallization solvents
• No bleaches or chemical whiteners
• No crude oil or distillate intermediary
• No THC extraction or remediation

Why it matters

• USDA Certified Organic
• Patented and proprietary process
• Cleaner inputs, fewer steps
• Exceptional consistency and purity from start to finish

This approach allows us to produce isolates that are clean, repeatable, and intentionally designed — without relying on harsh chemistry or unnecessary complexity.

CBG Isolate is one of the most versatile cannabinoid ingredients available. As a flavor-neutral, THC-Free (<LOQ) crystalline powder, it integrates easily into a wide range of applications — from finished products to custom formulations.

Common applications

• Used as-is — measured directly as a finished ingredient
• Encapsulated — for precise, repeatable measurement
• Mixed into carrier oils — to create custom tinctures (MCT, hemp seed, olive)
• Added to topicals — infused into balms, salves, lotions, or oils
• Infused into food or beverages — works in baked goods, gummies, smoothies, and more
• Blended with CBD — combined with CBD Isolate for custom multi-cannabinoid formulations

Working with isolate

CBG Isolate dissolves easily in fats and oils but does not dissolve in water. To incorporate it into a formulation:

• For oils and fats: gently warm the carrier (coconut oil, butter, MCT) to 140–180°F and stir in the isolate until fully dissolved.
• For beverages: mix into a fat-containing component first (cream, milk, oil-based syrup) before adding to the drink.
• For topicals: combine with the oil phase of your formulation during the warming stage.

For reference: 1 gram of ≥97% CBG Isolate contains approximately 970mg of CBG.

CBG Isolate is one of the easiest cannabinoid ingredients to work with at home. Because it's flavor-neutral and highly concentrated, you can build custom tinctures, topicals, and infused recipes with full control over potency and ingredients.

Quick start: Custom CBG tincture

A simple 30mL tincture at approximately 1000mg total CBG:

Ingredients:

• 1 gram CBG Isolate (≥97% purity)
• 30 mL (1 oz) carrier oil — MCT, hemp seed, or olive

Method:

1. Gently warm carrier oil to 140–180°F (do not boil).
2. Slowly stir in CBG Isolate until fully dissolved (1–2 minutes).
3. Remove from heat, transfer to a dropper bottle, and store in a cool, dark place.

This makes roughly 30 doses at ~33mg per 1mL serving.

More recipes and formulas

We publish full step-by-step guides for working with CBG Isolate, including:

• Tinctures
• Topicals (balms, salves, oils)
• Edible and beverage infusions

👉 Visit our Recipes & Formulas section for walkthroughs, ratios, and best practices.

Every batch of CBG Isolate is third-party tested for potency, safety, and compliance — including cannabinoid profile, residual solvents, heavy metals, pesticides, and microbial contaminants. The cannabinoid extracts used to formulate each batch are independently tested as well.

Find the batch ID printed on your product label and click below to view its Certificate of Analysis:

Available Certificates of Analysis

• 072024REFCBG-ORG-001
• 112524REFCBG-ORG-001
• 032426REFCBG-ORG-001

For all batch records — including extracts and pre-harvest reports — visit our full Lab Results page.

Does this contain THC?

No detectable THC. Our CBG Isolate is produced and tested to non-detect (<LOQ) levels of Delta-9 THC across every batch. Trace cannabinoids may be present at levels below laboratory quantification limits. We cannot guarantee a negative drug test.

Why is CBG Isolate harder to find than CBD Isolate?

CBG naturally occurs in hemp at much lower levels than CBD — often less than 1% of total cannabinoid content in mature plants. This makes production significantly more complex and resource-intensive, which is why CBG Isolate typically costs more and is offered by fewer producers than CBD Isolate.

Is this the same as distillate?

No. Distillate is produced from crude hemp oil and contains a mix of cannabinoids, terpenes, and residual plant compounds. Our CBG Isolate is ≥97% pure cannabigerol — a single-cannabinoid crystalline powder with no other cannabinoids, terpenes, or plant material.

How is your CBG Isolate different from typical market CBG isolate?

Most commercial CBG isolate is produced using chemical solvents like hexane, heptane, or supercritical CO2 with ethanol washes. Our CBG Isolate is produced through a patented water-only extraction process with no chemical solvents at any stage. This makes it suitable for clean-label brands, solventless formulations, and buyers who prioritize traceable, additive-free ingredients.

Is this USDA Organic?

Yes. The hemp source material is USDA Certified Organic, and our extraction facility maintains organic processing standards through the entire supply chain.

Can this be combined with other cannabinoids?

Yes. CBG Isolate is commonly combined with CBD Isolate to create custom formulations. Check out our Recipes & Formulas page for ideas on what to make.

Is this intended for DIY and formulation use?

Yes. CBG Isolate is widely used as an ingredient for custom tinctures, capsules, topicals, edibles, and infused products. It dissolves cleanly in MCT oil, hemp seed oil, and food-grade alcohol.

What's the typical formulation ratio for CBG Isolate?

1g of CBG Isolate yields approximately 970mg of pure CBG.

For DIY scale:

• 1g per 30mL carrier oil → ~32mg/mL daily-use tincture
• 3g per 30mL → ~97mg/mL high-potency tincture

For commercial formulation, common ratios run 30–100mg/mL for tinctures, with edible and topical loading varying by product type and target potency. For specific formulation guidance on bulk orders, contact us directly.

How should I store CBG Isolate?

Store in an airtight container in a cool, dark, dry place. Light, heat, and humidity slowly degrade cannabinoids over time. Properly stored, pure CBG Isolate is exceptionally shelf-stable and retains potency for years.

Do you provide a Certificate of Analysis?

Yes. Third-party batch-specific COAs are available for every lot. View current lab results on our Lab Results page, or contact us for batch-specific documentation prior to purchase.

Do you sell CBG Isolate in bulk?

Yes. For wholesale quantities (1kg minimum) or B2B formulation partnerships, contact us directly. We support custom batch sizes, white-label arrangements, COA review for prospective buyers, and tiered pricing based on volume commitments.